LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2005 >> MPV ES >> Repair and Diagnosis >> Body & Frame >> Exterior/Interior Trim >> Exterior Trim >> Extractor Chamber Removal/Installation

Extractor Chamber Removal/Installation

  1. Remove the rear bumper. (See REAR BUMPER REMOVAL/INSTALLATION .)
  2. Remove the jack.
  3. Remove the screw.
  4. Squeeze the clips with your fingers and remove the extractor chamber from the vehicle side.
  5. Install in the reverse order of removal.
    Fig 1: Identifying Extractor Chamber Removal/Installation Procedure
    G03701298Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals