LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2005 >> MPV ES >> Repair and Diagnosis >> Body & Frame >> Door Locks >> Security System And Locks System >> Sliding Door Lock-Link Switch Inspection >> Without PSD

Without PSD

  1. Disconnect the sliding door lock actuator connector.
  2. Inspect for continuity between the sliding door lock-link switch terminals using an ohmmeter.
    • If not as specified, replace the sliding door lock actuator.
    Fig 1: Sliding Door Lock-Link Switch Terminals Continuity Chart (Without PSD)
    G03701206Courtesy of MAZDA MOTORS CORP.
    Fig 2: Inspecting Sliding Door Lock-Link Switch Continuity (Without PSD)
    G03701207Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals