LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2005 >> MPV ES >> Repair and Diagnosis (Single Page) >> Steering >> Manual Steering >> Power Steering System >> Steering Gear And Linkage Assembly >> Mounting Bushing Assembly Note

Mounting Bushing Assembly Note

  1. Apply soapy water to the rubber part of the mounting bushing.
  2. Press the mounting bushing until the mounting bushing end comes out completely from the gear housing using the SSTs  and a press.
    Fig 1: Pressing Mounting Bushing (1 Of 2)
    G03700659Courtesy of MAZDA MOTORS CORP.
    Fig 2: Pressing Mounting Bushing (2 Of 2)
    G03700660Courtesy of MAZDA MOTORS CORP.
  3. Reverse the gear housing, then press the mounting bushing until the mounting bushing end comes out completely from the other side. At this time, mounting bushing end and steel pipe are aligned.
    Fig 3: Pressing Mounting Bushing Until Mounting Bushing End Comes Out Completely From Other Side
    G03700661Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals