LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2005 >> MPV ES >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Steering Column Switches >> Lighting System >> Flasher Control Module Removal/Installation

Flasher Control Module Removal/Installation

NOTE:
  • Because the lock section of the control module is damaged easily, do not remove the control module from the bracket unless replacement is necessary. Always perform an inspection of the flasher control module before removal.
  1. Disconnect the negative battery cable.
  2. Remove the bracket.
  3. Disconnect the flasher control module connector.
  4. Remove the flasher control module by prying the lock section of the upper part with a flathead screwdriver.
    Fig 1: Removing Flasher Control Module
    G03701387Courtesy of MAZDA MOTORS CORP.
  5. Install in the reverse order of removal.
scientia non olet · About LEMON Manuals