LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2005 >> B3000 Base, Standard >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 2 (Symptom Troubleshooting [Automatic Transmission]) >> Automatic Transmission Preliminary Inspection >> Check Fluid Level and Condition >> Fluid Level Check >> Adding Fluid

Adding Fluid

WARNING: This page is about a different variant/trim than selected.
CAUTION:
  • The use of any other type of transmission fluid than specified could result in transmission malfunction and/or damage.

Before adding fluid be sure that the correct type is being used; see GENERAL SPECIFICATIONS .

If fluid needs to be added, add fluid in 0.25L (1/2 pint) increments through the filler tube. Do not overfill the fluid. For fluid type, see the specification chart.

scientia non olet · About LEMON Manuals