LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2005 >> B3000 Base, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 446 (Security System And Locks System) >> Inner Handle Removal/Installation

Inner Handle Removal/Installation

WARNING: This page is about a different car, the 2005 Mazda 6. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the front door trim.
  2. Using a flathead screwdriver, press and hold the tab in the direction indicated by arrow (1), and remove the shaft by pulling it in the direction indicated by arrow (2).
    Fig 1: Removing Inner Handle
    G03645396Courtesy of MAZDA MOTORS CORP.
  3. Pull off the inner handle, and remove the door lock knob cable and inner handle cable.
  4. Install in the reverse order of removal.
scientia non olet · About LEMON Manuals