LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2005 >> B3000 Base, Automatic >> Repair and Diagnosis >> Engine Mechanical >> Auxiliary Emission Control Systems >> Emission System >> Dust Separator Removal/Installation

Dust Separator Removal/Installation

  1. Remove the evaporative emission canister. See EVAPORATIVE EMISSIONS CANISTER REMOVAL/INSTALLATION .
  2. Disconnect the canister vent solenoid hose assembly
    Fig 1: Disconnecting Canister Vent Solenoid Hose Assembly
    G03729211Courtesy of MAZDA MOTORS CORP.
  3. Remove the EVAP dust separator
    Fig 2: Removing EVAP Dust Separator
    G03729212Courtesy of MAZDA MOTORS CORP.
  4. Install in reverse order of removal
  5. Perform Leak Test. See EVAPORATIVE EMISSION SYSTEM LEAK TEST .
  6. Perform the Evaporative Emission Running Loss Monitor Repair Verification Drive Cycle Test. See DRIVE CYCLES .
scientia non olet · About LEMON Manuals