LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2005 >> B3000 Base, Automatic >> Repair and Diagnosis >> Accessories & Equipment >> Anti-Theft Systems >> Security System And Locks System >> Hood Lock Release Cable Removal/Installation

Hood Lock Release Cable Removal/Installation

NOTE:
  • The hood lock release handle and cable are replaced as an assembly.
  1. Remove the hood lock. See HOOD LOCK REMOVAL/INSTALLATION .
  2. Unclip the hood lock release handle and cable from the inner fender retainer and splash shield.
  3. Remove the two screws and position the hood lock release handle and cable aside.
  4. Remove the hood latch release and cable grommet (1) from the instrument panel.
  5. Remove the hood latch release handle and cable (2).
    Fig 1: Removing Hood Lock Release Cable
    G03731563Courtesy of MAZDA MOTORS CORP.
  6. Install in reverse order of removal.
scientia non olet · About LEMON Manuals