Driveline/Axle Technical Data
DRIVELINE/AXLE TECHNICAL DATA
| Item | Specification |
|---|---|
| Standard drive gear bearing preload | 0.6-2.1 N.m {6.2-21.4 kgf.cm, 5.4-18.5 in.lbf} |
| Standard ring gear bearing preload | 0.6-2.1 N.m {6.2-21.4 kgf.cm, 5.4-18.5 in.lbf} |
| Pinion height error factor within allowance limit | ± 0.032 mm {± 0.00126 in} |
| Drive pinion preload value | 0.88-1.37 N.m {9.0-14.0 kgf.cm, 7.9-12.1 in.lbf} |
| Standard drive pinion backlash | 0.09-0.11 mm {0.0035-0.0043 in} |