LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2005 >> 6 s, 4D Hatchback, Standard >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 4 (Symptom Troubleshooting (Engine Control System L3)) >> Engine Control System Operation Inspection >> Variable Tumble System Operation Inspection >> Notes

Variable Tumble System Operation Inspection: Notes

WARNING: This page is about a different variant/trim than selected.
  1. Connect the WDS or equivalent to the DLC-2.
  2. Access ECT PID.
  3. Verify that ECT PID is below 60°C {140°F}. 
  4. Start the engine.
  5. Inspect rod operation under the following conditions:
scientia non olet · About LEMON Manuals