Main Relay Operation Inspection
WARNING: This page is about a different variant/trim than selected.
- Verify that the main relay clicks when the ignition switch is turned to ON position and off.
- If there is no operation sound, inspect the following:
- Main relay (See RELAY INSPECTION .)
- Harness and connector between ignition switch and main relay terminal A.
- Harness and connector between PCM terminal 46*1 , 2X*2 and main relay terminal E.
- If there is no operation sound, inspect the following:
*1: California emission regulation applicable ATX model
*2: Except for California emission regulation applicable ATX model