LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2005 >> 6 s, 4D Hatchback, Automatic >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Automatic Transaxle [Shift Mechanism] >> Selector Lever Component Inspection

Selector Lever Component Inspection

  1. Disconnect the negative battery cable.
  2. Remove the center console.
  3. Remove the dashboard completely. (See DASHBOARD REMOVAL/INSTALLATION .)
  4. Disconnect the selector lever component connector.
  5. Inspect for continuity at the selector lever component.
    • If there is any malfunction, adjust the selector cable. (See SELECTOR CABLE ADJUSTMENT  .)
      Fig 1: Continuity Table For Selector Lever Component
      G03644895Courtesy of MAZDA MOTORS CORP.
      Fig 2: Identifying Selector Lever Connector Terminals
      G03644896Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals