LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2005 >> 6 s, 4D Hatchback, Automatic >> Repair and Diagnosis >> Electrical >> Starter >> Starting System >> Starter Inspection >> No Load Test

No Load Test

  1. Verify that the battery is fully charged.
  2. Connect the starter, battery, voltmeter and ammeter as shown.
  3. Operate the starter and verify that it rotates smoothly.
  4. Measure the voltage and current while the starter is operating.
    • If not as specified, repair or replace the starter if necessary.

      Specification 

      VOLTAGE SPECIFICATION

      Voltage (V) 11
      Current (A) 90 or less
      Fig 1: Connecting Voltmeter And Ammeter
      G03644078Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals