Check code 59
CHECK CODE 59 DIAGNOSTIC PROCEDURE
| STEP | INSPECTION | INDICATION | ACTION |
|---|---|---|---|
| 1 | The three digits number is indicated after selecting check code 59. Confirm the first digit from the right. |
First digit from the right 0 |
The CAN system is okay. Go to next step. |
| First digit from the right 1 |
The DTC of CAN system is detected. Perform the DTC inspection. (See DTC TABLE [MULTIPLEX COMMUNICATION SYSTEM] .)
Go to next step. |
||
| 2 | Confirm the second digit from the right. | Second digit from the right 0 |
The wiring harnesses between the fuel gauge sender unit and instrument cluster are okay. Go to next step. |
| Second digit from the right 1 |
Inspect following parts.
Go to next step. |
||
| 3 | Confirm the third digit from the right. | Third digit from the right 0 |
The fuel pulse signal from the PCM is okay. |
| Third digit from the right 1 |
Inspect the PCM. See DTC TABLE [L3] , DTC TABLE [AJ] , PCM INSPECTION [L3] , PCM INSPECTION [AJ]
|