LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2005 >> 6 s, 4D Hatchback, Automatic >> Repair and Diagnosis >> Electrical >> Horns >> Instrumentation/Driver Info >> Instrument Cluster Input/Output Check Mode >> Inspection of Check Codes >> Check code 01 >> Diagnostic procedure

Diagnostic procedure

CHECK CODE 01 DIAGNOSTIC PROCEDURE

STEP INSPECTION INDICATION ACTION
1 Unfasten driver-side seat belt. (Buckle switch on.) on Go to next step.
off Measure voltage at instrument cluster terminal 2G.
Is voltage 0 V  ?
  • If as specified, replace instrument cluster.
  • If not as specified, inspect following parts.
    • Buckle switch
    • Wiring harness (Buckle switch-instrument cluster)
2 Fasten driver-side seat belt. (Buckle switch off.) on Measure voltage at instrument cluster terminal 2G.
Is voltage B+  ?
  • If as specified, replace instrument cluster.
  • If not as specified, inspect following parts.
    • Buckle switch
    • Wiring harness (Buckle switch-instrument cluster)
off Input signal to instrument cluster is okay.
scientia non olet · About LEMON Manuals