LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2005 >> 6 s, 4D Hatchback, Automatic >> Repair and Diagnosis >> Accessories & Equipment >> Cruise Control Systems >> Cruise Control Switch Inspection

Cruise Control Switch Inspection

  1. Disconnect the negative battery cable.
  2. Remove the driver-side air bag module. (See DRIVER-SIDE AIR BAG MODULE REMOVAL/INSTALLATION .)
  3. Disconnect the cruise control switch connector.
  4. Inspect for resistance and continuity between the cruise control switch terminals using an ohmmeter.
    • If not as specified, replace the cruise control switch.
      Fig 1: Identifying Resistance And Continuity Chart
      G03644098Courtesy of MAZDA MOTORS CORP.
      Fig 2: Identifying Cruise Control Main Switch
      G03644099Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals