LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2005 >> 6 i, 4D Hatchback, Standard >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Engine Control System (L3) >> Crankshaft Position (CKP) Sensor Inspection >> Resistance Inspection

Resistance Inspection

  1. Disconnect the CKP sensor connector.
  2. Measure the resistance between CKP sensor terminals A and B using an ohmmeter.
    • If not as specified, replace the CKP sensor.
    • If CKP sensor resistance is normal, but RPM PID value is out of specification, perform the "Circuit Open/Short Inspection".

      Specification 

      400-550 ohms 

scientia non olet · About LEMON Manuals