LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2005 >> 3 s, 4D Hatchback, Standard >> Repair and Diagnosis >> External Pages >> Different variant/trim >> Section 5 (Automatic Transaxle [Shift Mechanism]) >> Selector Lever Component Inspection

Selector Lever Component Inspection

WARNING: This page is about a different variant/trim than selected.
  1. Remove the battery cover. (See BATTERY REMOVAL/INSTALLATION .)
  2. Disconnect the negative battery cable.
  3. Remove the console. (See CONSOLE REMOVAL/INSTALLATION .)
  4. Disconnect the selector lever component connector.
  5. Verify that the continuity is as indicated in the figures.
    Fig 1: Identifying Selector Lever Component Connector Terminals
    G03636608Courtesy of MAZDA MOTORS CORP.
    Fig 2: Selector Lever Position/Range Continuity Specifications
    G03636609Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals