Sunroof Motor Assembly Note
NOTE:
- If the guide is removed, initial position setting of the sunroof motor will be required. After installing the sunroof unit, perform initial position setting using the following procedure.
- Press the TILT UP switch to fully tilt up the glass panel.
- When the glass panel reaches the fully tilt up position, temporarily release the TILT UP switch and press it again for approx. 13 s continuously. Continue pressing the switch until the glass panel automatically stops at the fully tilt up position after reaching the mechanical lock position.
- When the glass panel stops at the fully tilt up position, temporarily release the TILT UP switch, then press it again within 5 s and hold.NOTE:
- Press the TILT UP switch continuously until the glass panel opens to the fully open position, returns to the fully closed position and then stops.
- Release the TILT UP switch when the glass panel stops at the fully closed position.