LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2005 >> 3 i, Standard >> Repair and Diagnosis >> Engine Mechanical >> Auxiliary Emission Control Systems >> Emission System >> EGR Valve Removal/Installation >> Notes

EGR Valve Removal/Installation: Notes

  1. Remove the plug hole plate.
  2. Remove the battery cover. (See BATTERY REMOVAL/INSTALLATION .)
  3. Disconnect the negative battery cable.
  4. Disconnect the EGR valve connector.
  5. Remove in the order indicated in the figure.
    Fig 1: EGR Valve Removal Sequence
    G03636001Courtesy of MAZDA MOTORS CORP.
  6. Install in the reverse order of removal.
scientia non olet · About LEMON Manuals