LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2005 >> 3 i, Automatic >> Repair and Diagnosis >> Engine Mechanical >> Cooling Fan >> Cooling System >> Radiator Removal/Installation >> Radiator Removal Note

Radiator Removal Note

  1. Remove the condenser from the radiator with the pipes still connected, by pressing the radiator side tab to unlock tab b on the condenser.
    Fig 1: Removing Condenser From Radiator
    G03635823Courtesy of MAZDA MOTORS CORP.
  2. Remove rubber mount A from the mount installation hole.
  3. Tilt the radiator to the engine side.
  4. Remove rubber mount B from the mount installation hole.
    Fig 2: Removing Rubber Mounts From Mount Installation Holes
    G03635824Courtesy of MAZDA MOTORS CORP.
  5. Remove the radiator from below.
scientia non olet · About LEMON Manuals