LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2005 >> 3 i, Automatic >> Repair and Diagnosis >> Electrical >> Body Electrical >> Control System (Body & Accessories) >> Passenger Junction Box (PJB) Inspection >> Without Using the SST >> Notes

Without Using the SST: Notes

  1. Remove the glove compartment.
  2. Remove the PJB with the connector connected.
  3. Measure the voltage at each terminal and inspect for the continuity between the terminals and ground is as indicated in the TERMINAL VOLTAGE TABLE (REFERENCE) .
    • If the voltage or continuity is not as specified in the TERMINAL VOLTAGE TABLE (REFERENCE) , inspect the parts under "Inspection item (s)".
      • If the system does not work properly even though the parts or related wiring harnesses do not have any malfunction, replace the PJB.
scientia non olet · About LEMON Manuals