LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2005 >> 3 SP23, 4D Hatchback, Automatic >> Repair and Diagnosis >> Transmission >> Automatic Trans >> Automatic Transaxle [Shift Mechanism] >> Selector Cable Adjustment

Selector Cable Adjustment

  1. Remove the console. (See CONSOLE REMOVAL/INSTALLATION .)
  2. Shift the selector lever to P position.
  3. Unlock the lock piece of the selector cable (selector lever side) in the order as shown in the figure.
    Fig 1: Unlocking Selector Cable Lock Piece
    G03636610Courtesy of MAZDA MOTORS CORP.
  4. Verify that the manual shaft is in the P position.
  5. Lock the lock piece and safety lock of the selector cable (selector lever side) in the order as shown in the figure.
    Fig 2: Locking Selector Cable Lock Piece
    G03636611Courtesy of MAZDA MOTORS CORP.
  6. Install the console. (See CONSOLE REMOVAL/INSTALLATION .)
  7. Shift the selector lever from the P position to M range, and make sure that there are no other components in that area to interfere with the lever.
scientia non olet · About LEMON Manuals