LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2005 >> 3 SP23, 4D Hatchback, Automatic >> Repair and Diagnosis >> Engine Performance >> Engine Control Systems >> Heated Oxygen Sensor (Ho2S) Removal/Installation >> Wiring Harness Bracket Installation Note

Wiring Harness Bracket Installation Note

NOTE:
  • There might be no pin. If there is no pin, lock the wiring harness bracket against rotation and tighten the nut.
Fig 1: Identifying Wiring Harness Bracket
G03636137Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals