Brakes Technical Data
BRAKES TECHNICAL DATA
| Item | Specification | ||
|---|---|---|---|
| CONVENTIONAL BRAKE SYSTEM | |||
| Brake pedal | Pedal height (reference value) | (mm {in}) | 136.4 {5.37} |
| Pedal play | (mm {in}) | 4.0-8.4 {0.16-0.33} | |
| Pedal-to-floor clearance (Brake pedal when depressed at 147 N {15.0 kgf, 33 lbf}) | (mm {in}) | 89.8 {3.54} or more | |
| Power brake unit | Fluid pressure when pedal depressed at 200 N {20.4 kgf, 44.9 lbf} (kPa {kgf/cm2 psi}) | At 0 kPa {0 mmHg, 0 inHg} | 500 {5.10, 72.6} or more |
| At 66.7 kPa {500 mmHg, 19.7 inHg} | 6,500 {66.29, 942.8} or more | ||
| Proportioning valve (without ABS) | Rear brake fluid pressure (kPa {kgf/cm2 psi}) | When front brake fluid pressure at 5,000 kPa {50.99 kgf/cm2 725.2 psi} | 3,500-3,700 {35.70-37.72, 507.7-536.6} |
| When front brake fluid pressure at 10,000 kPa {101.97 kgf/cm2 1450.4 psi} | 4,950-5,250 {50.48-53.53, 718.0-761.4} | ||
| Front brake (disc) | Minimum disc pad thickness | (mm {in}) | 2.0 {0.079} |
| Minimum disc plate thickness | (mm {in}) | 23 {0.91} | |
| Disc plate runout limit | (mm {in}) | 0.05 {0.002} | |
| Rear brake (disc) | Minimum disc pad thickness | (mm {in}) | 2.0 {0.079} |
| Minimum disc plate thickness | (mm {in}) | 9 {0.35} | |
| Disc plate runout limit | (mm {in}) | 0.05 {0.002} | |
| Brake fluid | Type | SAE J1703, FMVSS 116 DOT3 | |
| PARKING BRAKE SYSTEM | |||
| Parking brake lever | Lever stroke when pulled with 98 N {10 kgf, 22 lbf} at point 50 mm {1.97 in} from the end of the parking brake lever | (notches) | 3-6 |