LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2004 >> Tribute LX, 4WD >> Repair and Diagnosis >> Suspension >> Front Suspension >> Front Suspension System >> Lower Arm >> Installation

Lower Arm: Installation

  1. Install the lower arm bolts loosely. See Figure .
  2. Install the pinch bolt into the wheel knuckle.
    Fig 1: Installing Pinch Bolt
    G00375725Courtesy of MAZDA MOTORS CORP.
  3. Remove the subframe support. See Figure .
  4. Position the screw jack under the ball joint and raise the ball joint until the previously recorded ride height is achieved.
  5. Tighten the lower arm bolts. See Figure .
  6. Remove the screw jack.
  7. Install the wheel and tire.
scientia non olet · About LEMON Manuals