LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2004 >> Tribute ES, FWD >> Repair and Diagnosis >> External Pages >> Different car >> Section 531 (Power Steering System) >> Ignition Switch >> Removal and Installation

Removal and Installation

WARNING: This page is about a different car, the 2005 Mazda Tribute. However, it is still accessible from the selected car via links, so may be relevant.
Fig 1: Removing Upper Steering Column Shroud
G03726442Courtesy of MAZDA MOTORS CORP.
  1. Remove the upper steering column shroud.
    Fig 2: Removing Lower Steering Column Shroud
    G03726443Courtesy of MAZDA MOTORS CORP.
  2. Remove the lower steering column shroud.
    1. Remove the screws.
    2. Remove the lower steering column shroud.
    Fig 3: Removing Lower Steering Column Shroud
    G03726444Courtesy of MAZDA MOTORS CORP.
    NOTE:
    • Lower the steering column to the lowest tilt position.
  3. Remove the ignition switch.
    1. Press the two tabs.
    2. Pull the ignition switch outward.
  4. To install, reverse the removal procedure.