LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2004 >> Tribute ES, FWD >> Repair and Diagnosis >> Engine Performance >> System >> Symptom Troubleshooting (Engine/Fuel Control) >> Drive Cycle >> Monitor Repair Verification Drive Cycles >> Fuel Or Misfire Monitor Repair Verification Drive Cycle:

Fuel Or Misfire Monitor Repair Verification Drive Cycle:

  1. Complete Vehicle Preparation.
  2. Perform the following drive procedure three consecutive times.
    • Accelerate on highway to 104 km/h (65 mph).
    • Coast down with foot off the accelerator pedal (no brakes) from 104 km/h to 64 km/h (65 mph to 40 mph).
  3. Verify no DTCs are available with exception of P1000.