LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2004 >> RX-8 1.3 3 >> Repair and Diagnosis >> Engine Performance >> System >> On-Board Diagnostic (Engine Control System 13BMSP] >> OBD-II Drive Mode >> Mode 1 (PCM Adaptive Memory Produce Drive Mode)

Mode 1 (PCM Adaptive Memory Produce Drive Mode)

  1. Start the engine and warm it up completely.
  2. Verify the following conditions and correct if necessary:
    • All accessory loads (A/C, headlights, blower fan, rear window defroster) are off.
    • Initial ignition timing and idle speed are within specification.
  3. Perform no load racing at the engine speed of 2,500-3,500 RPM  for more than 15 s  .
  4. Continuously perform no load racing at the engine speed of 4,500-5,000 RPM  for more than 15 s  .
  5. Idle the engine for more than 60 s  after the cooling fan stopped.
  6. Turn the ignition switch off.
scientia non olet · About LEMON Manuals