LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2004 >> RX-8 1.3 3 >> Repair and Diagnosis >> Body & Frame >> Exterior/Interior Trim >> Interior Trim >> Dashboard Removal/Installation

Dashboard Removal/Installation

  1. Disconnect the negative battery cable.
  2. Remove the following parts:
    1. Console (See CONSOLE REMOVAL/INSTALLATION .)
    2. Glove compartment (See GLOVE COMPARTMENT REMOVAL/INSTALLATION .)
    3. Side panels (See SIDE PANEL REMOVAL/INSTALLATION .)
    4. Lower panel (See LOWER PANEL REMOVAL/INSTALLATION .)
    5. Column cover (See COLUMN COVER REMOVAL/INSTALLATION .)
    6. Steering shaft installation nuts (See STEERING WHEEL & COLUMN REMOVAL/INSTALLATION .)
    7. A-pillar trim (See A-PILLAR TRIM REMOVAL/INSTALLATION .)
  3. Remove in the order indicated. See Fig 1.
    Fig 1: Removal Order Of Dashboard
    G01344485Courtesy of MAZDA MOTORS CORP.
    WARNING:
    • Removing the dashboard without supporting it can be dangerous. The dashboard may fall and injure you. Always perform the following procedure with at least another person.
    Fig 2: Removing/Installing Dashboard
    G01344486Courtesy of MAZDA MOTORS CORP.
  4. Remove the dashboard.
  5. Take the dashboard off from the front driver-side door opening.
  6. Install in the reverse order of removal.
scientia non olet · About LEMON Manuals