LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2004 >> RX-8 1.3 3 >> Repair and Diagnosis >> Body & Frame >> Door Locks >> Security System And Locks System >> Coil Removal/Installation

Coil Removal/Installation

NOTE:
  • The coil should not be removed unless it is being replaced
  1. Disconnect the negative battery cable.
  2. Remove the column cover. (See COLUMN COVER REMOVAL/INSTALLATION .)
  3. Disconnect the coil connector.
    Fig 1: Removing/Installing Coil
    G01344447Courtesy of MAZDA MOTORS CORP.
  4. Detach the steering lock tab from hole on the coil.
  5. Detach the coil tab from the steering lock and remove the coil.
  6. Install in the reverse order of removal.
scientia non olet · About LEMON Manuals