LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2004 >> RX-8 1.3 3 >> Repair and Diagnosis >> Accessories & Equipment >> Entertainment Systems >> Entertainment System >> Condenser Removal/Installation

Condenser Removal/Installation

  1. Disconnect the negative battery cable.
  2. Remove the following parts:
    1. Rear seat (See REAR SEAT REMOVAL/INSTALLATION .)
    2. Console (See CONSOLE REMOVAL/INSTALLATION .)
    3. Tire house trim (See TIRE HOUSE TRIM REMOVAL/INSTALLATION .)
    4. Rear pillar trim REAR PILLAR TRIM REMOVAL/INSTALLATION .)
    5. Rear package center trim, rear package side trim (See REAR PACKAGE TRIM REMOVAL/INSTALLATION .)
  3. Remove in the order indicated. See Fig 1.
    Fig 1: Removal Order Of Condenser
    G01344697Courtesy of MAZDA MOTORS CORP.
  4. Install in the reverse order of removal.
    Fig 2: Removing/Installing Condenser
    G01344698Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals