LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2004 >> MX-5 Miata Mazdaspeed >> Repair and Diagnosis >> Restraints >> Restraints Control Systems >> Seat Belt System >> Buckle Switch Inspection

Buckle Switch Inspection

  1. Disconnect the negative battery cable.
  2. Disconnect the buckle switch connector.
  3. Inspect for continuity between the seat belt switch terminals using an ohmmeter.
    • If not as specified, replace the buckle.
    Fig 1: Seat Belt Buckle Switch Continuity Table
    G00989025Courtesy of MAZDA MOTORS CORP.
    Fig 2: Locating Seat Belt Switch Connector
    G00989026Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals