LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2004 >> MX-5 Miata Mazdaspeed >> Repair and Diagnosis >> Restraints >> Restraints Control Systems >> Seat Belt System >> Buckle Removal/Installation

Buckle Removal/Installation

  1. Disconnect the negative battery cable.
  2. Disconnect the buckle switch connector.
  3. Remove the bolt, then remove the buckle.
  4. Install in the reverse order of removal.
    Fig 1: Removing/Installing Buckle
    G00989024Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals