Door Glass Adjustment: Notes
- Adjust the clearance between the upper edge of the door glass and the ventilator glass weatherstrip.
- If vehicle has a convertible top, adjust the retainer. (See
RETAINER ADJUSTMENT
.)
Courtesy of MAZDA MOTORS CORP. DOOR GLASS ADJUSTMENT
| Clearance |
Standard |
Minimum |
Maximum |
| a |
0{0} |
-0.5 {-0.02} |
1.0 {0.04} |
- Adjust the convertible top. (See
TOP LOCK
.)
- Adjust the detachable hardtop. (See
TOP LOCK
.)
- Raise the door glass fully and adjust it so that there is no clearance with the retainer weatherstrip.
- Remove the retainer weatherstrip.
- Adjust the door glass vertically.
- Adjust the door glass forward/backward.
- Adjust the door glass inward/outward.
- Verify the door glass is in correct position when it is fully raised.
- Install the weatherstrip.
- Verify the door glass raises and lowers smoothly with the door closed.
NOTE:
- The front retainer installation hole is named retainer installation hole No.1, and the bottom hole is named retainer installation hole No.8 (convertible top) or retainer installation hole No.6 (detachable hardtop).