Resistance Inspection

NOTE:

Perform the following test only when directed.

Disconnect the fuel injector connectors.
Measure the resistance of the fuel injector using an ohmmeter.
- If as specified but the On-vehicle Inspection failed, perform the "Circuit Open/Short Inspection". See CIRCUIT OPEN/SHORT INSPECTION .
- If not as specified, replace the fuel injector. See FUEL INJECTOR REMOVAL/INSTALLATION .
1. Resistance 12-13 ohms [20°C {68°F}]
Fig 1: Measuring Resistance Of Fuel Injector Using An Ohmmeter
Courtesy of MAZDA MOTORS CORP.