LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2004 >> MX-5 Miata Base, Standard >> Repair and Diagnosis >> Engine Performance >> Fuel Delivery >> Fuel System >> Fuel Pump (FP) Inspection >> Continuity Inspection

Continuity Inspection

NOTE:
  • Perform the following test only when directed.
  1. Disconnect the negative battery cable.
  2. Remove the service hole cover.
  3. Disconnect the FP connector.
  4. Inspect for continuity between FP connector terminals B and D.
    • If there is no continuity, replace the FP body.
    • If as specified, carry out the "Circuit Open/Short Inspection".
    Fig 1: Identifying Fuel Pump Connector Terminals
    G00990088Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals