Total Toe-in Adjustment

WARNING: This page is about a different car, the 2003 Mazda MX-5 Miata and 2002 Mazda MX-5 Miata. However, it is still accessible from the selected car via links, so may be relevant.

CAUTION:

Adjust the toe-in before adjusting the camber.

Loosen the front and/or rear cam nuts.
Turn the front and/or rear adjusting cam bolts equally to provide the correct toe-in.

Fig 1: Toe-In Adjusting Table
Courtesy of MAZDA MOTORS CORP.
NOTE:
- Turning the front cam one graduation changes the toe-in about 2.3 mm {0.1 in} and the camber about 13'. Turning the rear cam NE graduation changes the toe-in about 2.3 mm {0.1 in} and the amber about 8'.
Adjust the camber.

Fig 2: Adjusting Toe-In
Courtesy of MAZDA MOTORS CORP.