LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2004 >> MPV ES >> Repair and Diagnosis >> Heating, Ventilation & A/C (HVAC) >> HVAC Control Systems >> HVAC System >> Control System >> Rear Resistor Removal/Installation

Rear Resistor Removal/Installation

  1. Disconnect the negative battery cable.
  2. Remove the rear side trim (RH). (See REAR SIDE TRIM REMOVAL/INSTALLATION .)
  3. Remove in the order indicated in the illustration.
    Fig 1: Removing Order Of Rear Resistor
    G00992142Courtesy of MAZDA MOTORS CORP.
    Fig 2: Removing/Installing Rear Resistor
    G00992143Courtesy of MAZDA MOTORS CORP.
  4. Install in the reverse order of removal.
scientia non olet · About LEMON Manuals