Relay Inspection: Five-terminal

WARNING: This page is about a different car, the 2005 Mazda MX-5 Miata. However, it is still accessible from the selected car via links, so may be relevant.

Remove the relay.
Inspect for continuity between the relay terminals using an ohmmeter.
- If not as specified, replace the relay.
Fig 1: Five-Terminal Connector Continuity
Courtesy of MAZDA MOTORS CORP.

Fig 2: Inspecting For Continuity Between Five-Terminal Relay Terminals Using An Ohmmeter
Courtesy of MAZDA MOTORS CORP.