LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2004 >> MPV ES >> Repair and Diagnosis >> External Pages >> Different car >> Section 236 (Security System And Locks System) >> Front Outer Handle Removal/Installation

Front Outer Handle Removal/Installation

WARNING: This page is about a different car, the 2003 Mazda 6. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the front door glass.
  2. Detach the outer handle and front door latch rod.
  3. For protector-equipped vehicles, refer to key cylinder removal/installation to remove the protector.
  4. Remove the bolts.
    Fig 1: Removing Front Outer Handle Bolts
    G01931110Courtesy of MAZDA MOTORS CORP.
  5. With the rear side of the outer handle fixed and the outer handle lever pulled out (1), remove the rear side of the outer handle from the front door.
  6. Pull out the front side of the outer handle from the front door.
  7. Install in the reverse order of removal.
    Fig 2: Removing Rear Side Of Outer Handle From Front Door
    G01931111Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals