LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2004 >> MPV ES >> Repair and Diagnosis >> Engine Performance >> Tune-Up >> Ignition System >> Ignition Coil Inspection >> Secondary Coil Winding

Secondary Coil Winding

  1. Disconnect the ignition coil connector.
  2. Remove the ignition coil. (See IGNITION COIL REMOVAL/INSTALLATION .)
  3. Measure the resistance using an ohmmeter as shown in the figure:
    • If not as specified, replace the ignition coil.

    Resistance (Reference) 

    5.0-6.0 kilohms [25 °C {77°F}] 

    Fig 1: Measuring Resistance Of Secondary Coil Winding Using Ohmmeter
    G00991585Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals