LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2004 >> MPV ES >> Repair and Diagnosis >> Engine Performance >> Tune-Up >> Ignition System >> Ignition Coil Inspection >> Primary Coil Winding

Primary Coil Winding

  1. Disconnect the ignition coil connector.
  2. Measure the resistance between the following terminals using an ohmmeter:
    • A and B
      • If not as specified, replace the ignition coil.

    Resistance (Reference) 

    0.45-1.15 ohms [25°C {77°F}] 

    Fig 1: Identifying Ignition Coil Terminals
    G00991584Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals