LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2004 >> MPV ES >> Repair and Diagnosis >> Engine Performance >> Remove, Overhaul & Install >> Emission System >> Catch Tank Inspection

Catch Tank Inspection

  1. Remove the catch tank.
  2. Plug the purge solenoid valve side port of the catch tank.
  3. Blow from the charcoal canister side port and verify that there is no air leakage fro the case.
    • If not as specified, replace the catch tank.
      Fig 1: Inspecting Catch Tank
      G00993706Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals