LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2004 >> MPV ES >> Repair and Diagnosis (Single Page) >> Accessories & Equipment >> Headlights >> Lighting System >> Flasher Control Module Inspection

Flasher Control Module Inspection

  1. Remove the bracket and pull it toward you.
  2. Measure the voltage at the flasher control module terminals as indicated below.
  3. Disconnect the flasher control module connector before inspecting for continuity at terminal F.
    • If not as specified, inspect the parts listed under "Action."
    • If the parts and wiring harnesses are okay but the system still does not work properly, replace the flasher control module.
    Fig 1: Identifying Flasher Control Module Connector Terminals
    G02564078Courtesy of MAZDA MOTORS CORP.
    Fig 2: Flasher Control Module Terminal Voltage Reference List
    G02564079Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals