LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2004 >> B4000 Base, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 249 (Security System And Locks System) >> Trunk Lid Opener Cancel Switch Removal/Installation

Trunk Lid Opener Cancel Switch Removal/Installation

WARNING: This page is about a different car, the 2004 Mazda RX-8. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the negative battery cable.
  2. Remove the glove compartment.
  3. Squeeze the tabs of the trunk lid opener cancel switch and pull it forward to remove it.
    Fig 1: Removing/Installing Trunk Lid Opener Cancel Switch
    G01344444Courtesy of MAZDA MOTORS CORP.
  4. Disconnect the trunk lid opener cancel switch connector.
  5. Remove the trunk lid opener cancel switch.
  6. Install in the reverse order of removal.
scientia non olet · About LEMON Manuals