LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2004 >> B4000 Base, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 249 (Security System And Locks System) >> Trunk Lid Latch & Opener Removal/Installation

Trunk Lid Latch & Opener Removal/Installation

WARNING: This page is about a different car, the 2004 Mazda RX-8. However, it is still accessible from the selected car via links, so may be relevant.
  1. Disconnect the negative battery cable.
  2. Remove the trunk end trim. (See TRUNK END TRIM REMOVAL/INSTALLATION .)
  3. Detach the rod.
  4. Disconnect the trunk lid opener connector and the trunk compartment light connector.
    Fig 1: Removing/Installing Trunk Lid Latch & Opener
    G01344434Courtesy of MAZDA MOTORS CORP.
  5. Remove the bolts, then remove the trunk lid latch and opener.
  6. Install in the reverse order of removal.
scientia non olet · About LEMON Manuals