LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2004 >> B4000 Base, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 249 (Security System And Locks System) >> Rear Door Release Handle Removal/Installation

Rear Door Release Handle Removal/Installation

WARNING: This page is about a different car, the 2004 Mazda RX-8. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the rear door lower trim. (See REAR DOOR LOWER TRIM REMOVAL/INSTALLATION .)
  2. Remove the rear door upper trim. (See REAR DOOR UPPER TRIM REMOVAL/INSTALLATION .)
  3. Remove the bolts, then remove the rear door release handle.
    Fig 1: Removing/Installing Rear Door Release Handle
    G01344384Courtesy of MAZDA MOTORS CORP.
  4. Detach the rear door upper and lower latch cables.
  5. Install in the reverse order of removal.
scientia non olet · About LEMON Manuals