LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2004 >> B4000 Base, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 249 (Security System And Locks System) >> Hood Striker Removal/Installation

Hood Striker Removal/Installation

WARNING: This page is about a different car, the 2004 Mazda RX-8. However, it is still accessible from the selected car via links, so may be relevant.
  1. Remove the bolt, then remove the hood striker.
  2. Install in the reverse order of removal.
    Fig 1: Removing Hood Striker
    G01344414Courtesy of MAZDA MOTORS CORP.
scientia non olet · About LEMON Manuals