LEMON Manuals: Even more car manuals for everyone
Home >> Mazda >> 2004 >> B4000 Base, Standard >> Repair and Diagnosis >> External Pages >> Different car >> Section 249 (Security System And Locks System) >> Hood Latch & Release Lever Removal/Installation >> Hood Release Lever Removal Note

Hood Release Lever Removal Note

WARNING: This page is about a different car, the 2004 Mazda RX-8. However, it is still accessible from the selected car via links, so may be relevant.
  1. Pull the lever.
  2. While pushing the tab in the direction of the arrow using a tape-wrapped, small flathead screwdriver, detach it from the dashboard.
    CAUTION:
    • Remove the hood release lever while taking care not to damage the hood release cable with the flathead screwdriver.
    Fig 1: Removing Hood Release Lever
    G01344413Courtesy of MAZDA MOTORS CORP.
  3. Under the condition in Step  2, pull the hood release lever outward, then remove it from the dashboard.
scientia non olet · About LEMON Manuals